Features

• With a sophisticated low-power LCD display, the local display shows instantaneous flow, cumulative flow, frequency, pressure, temperature, density, current, percentage etc .
• Probe used four piezoelectric ceramic technologies to effectively eliminate the influence of external vibration on the measurement
• No moving parts, no wear, no mechanical maintenance and long service life
• The probe and signal converter are universally interchangeable
• Split type signal converter can be used, the cable can be up to 10 meters long.
• Output 4-20mA current signal / pulse signal, or Modbus RS485 signal
• Two types of intrinsic safety explosion-proof: Exia II CT6Ga; flameproof: Exd II CT6Gb
• With HART–Protocol communication protocol, Modbus RS485 interface.

Application

 

• Widely used in Paper, sugar, various beverages
• Water supply and drainage, environmental protection,
• Water conservancy engineering, steel, petroleum, mining,
• Pharmaceutical, heating, water supply,
• Hot steam, saturated steam, compressed air.

Basic Specificaiton

 

Description		Parameters
Nominal diameter(mm)		Claming connection  DN15～DN300                                          Flange connection DN15～DN500
Measuring medium		Gas, liquid, steam
Pressure（MPa）		1.6、2.5、4.0、6.3   Others are optional
Medium  temp.		Standard temp.（-40 ～ +150）℃ medium temp.（-40 ～ +250）℃ high temp.（-40 ～ +350）℃
Material		SUS304 / SUS316/ SUS316L, others are optional
Accuray		1.0%FS
Repeatability		≤±0.33%
Range ratio		1：10 ～ 1：20
converter	Type	Intergrated type， split type, temp. & pressure compensation type
	Power supply	12VDC/24VDC, battery
	Display type	LCD display
	Telecommunication	HART , Modbus RS485
	Signal output	Three wires， 4-20mA two wires
	Ex-proof grade	Intrinsically safe ex-proof Exia Ⅱ CT6FGa                              flameproof  Exd Ⅱ CT6Gb
	Protection	IP65,IP67,IP68
	Electrical connection	M20×1.5,1/2NPT
Ambient condition	Temp.	（-30 ～ +60）℃
	Humidity	5% ～ 90%
	Air pressure	（86 ~～106）kPa

PT124B-503 Datasheet ( PDF )